Bus Bar Supports / Insulators

Molded in glassfilled NY 6 material. It has very good Mechanical, Electrical and Thermal properties. Very useful to mount BUS BAR in LT Panels. can be used in multiple applications like Mounting heatsink, Mounting Transformer, Fuse link Mounting. Varios sizes with many combinations are available. Long lenghts in 12A/F are very useful to mount acrylic sheets in control panels.

Hex A/F 12MM

Material :
30 % Glassfilled Nylon 6

Colour :
Black

Available Sizes :

A/F	Length	Threading
12	Length bet, 20 to 110 with diff, of 5 mm	M3, M4, M5

Both side screw, one side insert and one side screw are also available

Hex A/F 20MM

Material :
30 % Glassfilled Nylon 6

Colour :
Black

Available Sizes :

A/F	Length	Threading
20	Length bet, 25 to 50, with diff, of 5 mm	M4, M5, M6

Both side screw, one side insert and one side screw are also available

Hex A/F 25MM

Material :
30 % Glassfilled Nylon 6

Colour :
Black

Available Sizes :

A/F	Length	Threading
25	Length bet, 25 to 50, with diff, of 5 mm	M4, M5, M6, M8

Both side screw, one side insert and one side screw are also available

Technical Specifications of 30% Glass Filled NYLON 6

Properties	Test method	Units	Values
Physical
Specific Gravity	D-792	%	1.24
Glass Contents		%	15%
Water Absorption	D-570		0.7
Mechanical
Tensile Strength	D-638	mpa	115
Flexural Strength	D-790	mpa	4000
Impact Strength	D-25GA	kg. cm/cm	12/24
Rockwell Hardness	D-785	M.Scale	90
Electrical		R.Scale	120
Dilete Ctric Strength	D-149	kv/mm	23
Volume Resistivity	D-257	ohms-om	10.15
Thermal
Temp of Deflection Under Load		Deg.c	175

Tests carried at Ertlon on Insulator
• Insulation Resistance Test
• High Voltage Break Down Test
• Test Report Is Available